Troubleshooting The Boot Process - HPE Integrity rx2800 i2 series User's & Service Manual

Table 40: Gb LAN connector LEDs
LED
Link (left)
Activity (right)

Troubleshooting the boot process

Cause
NOTE:
Table 41: Normal boot process LED states
Step
1
2
3
4
5
6
In the standard boot process, shown in the preceding table, even though the iLO MP is running
while the system is shut down (power LED is steady amber), it does not drive the system health
LED to steady green until +12 V DC power from the Bulk Power Supplies is applied.
The following list itemizes the steps that characterize basic platform boot flow. Step numbers provided
correspond to the steps in Normal boot process LED states.
Description
Green: link
Off: no link
Green: link
Off: No link
System Health
Event
Log
Off Off
Off Off
Off Off
Off Steady
green
Off Steady
green
Steady Steady
green green
Power SID
Off Off
Steady Off
amber
Steady Off
green
Steady Off
green
Steady Off
green
Steady Off
green
Troubleshooting the boot process
Normal power-up through
OS boot
No AC power to the system.
System is shut down, but
AC power and standby
power is active.
System power rails are on
when power switch is
toggled.
System power rails are on;
iLO MP drives system
health LED.
System is booting firmware
(has passed BOOT_START
in firmware).
System has finished booting
firmware and an OS is
either booting or running.
125