Removing And Replacing The Intrusion Switch Cable - HPE Integrity rx2800 i2 series User's & Service Manual

• Install the component as described above.

Removing and replacing the intrusion switch cable

The intrusion switch screws face CPU 0.
Procedure
1. Power off the server (Powering off the server).
2. Remove the access panel (Removing the access panel).
3. Remove the PCI riser cage (Removing the PCI riser cage).
4. Open the processor cage.
5. Using a screwdriver, remove the switch.
6. Unplug the mating connector.
170 Removing and replacing the intrusion switch cable