Completing Installation - HPE Integrity rx2800 i2 series User's & Service Manual

7D447E94,0x0)
002 Mac0(0237D447E95)
MAC(0023
7D447E95,0x0)
003 Mac0(0237D448E5E)
MAC(0023
7D448E5E,0x0)
004 Mac0(0237D448E5F)
MAC(0023
7D448E5F,0x0)
FIRMWARE INFORMATION
System Firmware A Revision: 01.03
PAL_A:
PAL_B:
UEFI Spec:
UEFI Shell: 1.00
SYSTEM SECURITY CONFIGURATION
TPM:
Shell>

Completing installation

After all components are installed:
Procedure
1. Close the processor cage.
2. Install the PCI riser cage.
3. Install the access panel.
4. Install the server into the rack or pedestal.
5. Connect all cables.
6. Power on the server.
PcieRoot(0x30304352)/Pci(0x1C,0x0)/Pci (0x0,0x0)/
PcieRoot(0x30304352)/Pci(0x1C,0x2)/Pci (0x0,0x0)/
PcieRoot(0x30304352)/Pci(0x1C,0x2)/Pci (0x0,0x1)/
4.29 SAL Spec: 3.20
4.29 SAL_A: 2.00
2.10 SAL_B: 3.01
SMBIOS: 2.4
Present
Completing installation 81