Hp-Ux Standard Boot - HPE Integrity rx2800 i2 series User's & Service Manual

Table of Contents

NOTE:

Commands are not case-sensitive.

Procedure

1. Access the UEFI Shell environment.

a. Log in to iLO for Integrity, and then to access the system console, enter CO.

When accessing the console, confirm that you are at the UEFI Front Page.

If you are at another UEFI menu, then choose the Exit option, or press X to exit the menu. Exit until

you return to the screen that lists the keys that can be pressed to launch various Managers.

b. To launch the UEFI shell, press S.

2. Access the UEFI System Partition (fsX: where X is the file system number) for the device from which

you want to boot HP-UX.

3. For example, to access the UEFI System Partition for the bootable file system number 2, enter fs2:.

The UEFI Shell prompt changes to reflect the file system currently accessed.

4. The full path for the HP-UX loader is \EFI\HPUX\HPUX.EFI and is on the device you are accessing.

5. At the UEFI Shell environment, use the bcfg command to manage the boot options list.

6. The bcfg command includes the following options for managing the boot options list:

a. bcfg boot dump

–Display all items in the boot options list for the server.

b. bcfg boot rm #

–Remove the item number specified by # from the boot options list.

c. bcfg boot mv #a #b

–Move the item number specified by #a to the position specified by #b in the boot options list.

d. bcfg boot add # file.EFI "Description"

–Add a new boot option to the position in the boot options list specified by #. The new boot option

references file.EFI and is listed with the title specified by Description.

For example, bcfg boot add 1 \EFI\HPUX\HPUX.EFI "HP-UX 11i v3" adds an HP-UX

11i v3 item as the first.

7. For details, see the help bcfg command.

8. Exit the console and iLO MP interfaces.

9. Press Ctrl-B to exit the system console and return to the iLO 3 MP Main Menu. To exit the MP, at the

Main Menu, enter X.