I/O Subsystem - HPE Integrity rx2800 i2 series User's & Service Manual

• Memory expansion board connector 4
• Fan 6 connector
• Fan 5 connector
• Fan 4 connector
• Fan 3 connector
• Internal USB connector
• Fan 2 connector
• Fan 1 connector
Figure 3: Internal USB location

I/O subsystem

The I/O subsystem consists of the core I/O and two optional I/O riser boards. Wake-on-LAN is not
enabled on any PCIe Public slots. The server does not support PCI Hot Plug (PHP).
The standard I/O Riser supports one full-height, full-length PCIe x8 and two full-height, half-length PCIe
x4 add-in cards. The second riser option supports one full-height, full-length PCIe x8, and one full-height,
half-length PCIe x8 add-in cards.
NOTE:
All PCIe x8 slots are electrically connected as x8 slots but are physically loaded with x16
connectors.
The secondary I/O riser position can either be a riser that supports one full-height, full-length PCIe x8 and
two low-profile PCIe x4 add-in cards or a riser that supports one full-height, full-length PCIe x8 and one
low profile PCIe x8.
RAID support
The following levels of RAID support are offered:
• Zero memory
I/O subsystem 15