Hpe Trusted Platform Module 2.0 Gen10 Option; Overview; Hpe Trusted Platform Module 2.0 Guidelines - HPE ProLiant DL160 Gen10 User Manual

Hide thumbs Also See for ProLiant DL160 Gen10:

Table of Contents

20. Power up the server.

21. If removed, install the bezel.

The installation is complete.

To configure the M.2 SATA SSDs, see the HPE Smart Array SR Gen10 Configuration Guide at the Hewlett Packard

Enterprise website.

HPE Trusted Platform Module 2.0 Gen10 option

Use these instructions to install and enable an HPE TPM 2.0 Gen10 Kit in a supported server. This option is not

supported on Gen9 and earlier servers.

This procedure includes three sections:

1. Installing the Trusted Platform Module board.

2. Enabling the Trusted Platform Module.

3. Retaining the recovery key/password.

HPE TPM 2.0 installation is supported with specific operating system support such as Microsoft

R2 and later. For more information about operating system support, see the product QuickSpecs on the Hewlett Packard

Enterprise website (http://www.hpe.com/info/qs). For more information about Microsoft

Encryption feature, see the Microsoft website (http://www.microsoft.com).

CAUTION: If the TPM is removed from the original server and powered up on a different server, data stored in the

TPM including keys will be erased.

IMPORTANT: In UEFI Boot Mode, the HPE TPM 2.0 Gen10 Kit can be configured to operate as TPM 2.0 (default)

or TPM 1.2 on a supported server. In Legacy Boot Mode, the configuration can be changed between TPM 1.2 and

TPM 2.0, but only TPM 1.2 operation is supported.

CAUTION: Always observe the guidelines in this document. Failure to follow these guidelines can cause hardware

damage or halt data access.

Hewlett Packard Enterprise SPECIAL REMINDER: Before enabling TPM functionality on this system, you must ensure

that your intended use of TPM complies with relevant local laws, regulations and policies, and approvals or licenses must

be obtained if applicable.

For any compliance issues arising from your operation/usage of TPM which violates the above mentioned requirement,

you shall bear all the liabilities wholly and solely. Hewlett Packard Enterprise will not be responsible for any related

liabilities.

When installing or replacing a TPM, observe the following guidelines:

Windows Server

Windows

BitLocker Drive

Hardware options installation

2012

Table of Contents