9.3
Installing Batteries
EATON Powerware
FI−UPM Air Filter
9.2.3
PERIODIC Maintenance
Periodic inspections of the UPS should be made to determine if components, wiring,
and connections exhibit evidence of overheating. Particular attention should be given
to bolted connections. Maintenance procedures should specify that the bolted
connections be retorqued to values listed in this manual.
9.2.4
ANNUAL Maintenance
Annual preventive maintenance should be performed only by authorized service
personnel familiar with maintenance and servicing of the UPS system. Contact an
Eaton service representative for more information about service offerings.
9.2.5
BATTERY Maintenance
Contact an Eaton service representative for battery maintenance. Battery replacement
and maintenance should be performed only by authorized service personnel.
NOTE There is no manual DC disconnect device within the UPS.
Install batteries in accordance with the battery and battery system manufacturer's
instructions.
®
9395 UPS (1000–1100 kVA) Installation and Operation Manual
Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä
Figure 9-3. FI−UPM Air Filter Location
S
164201764 Rev 1 www.powerware.com
UPS MAINTENANCE
9−5