6.5
Multiple UPS Distributed Bypass System Oneline Configurations
Oneline Drawing
Figure 6-13 on page 6−18
Figure 6-14 on page 6−19
Figure 6-15 on page 6−20
EATON Powerware
The distributed bypass system oneline drawings in this section show the simplified
internal structure of the UPS, battery supply, and basic maintenance bypass in a
multiple UPS configuration. These onelines do not show each UPM in the UPSs, but
represent each UPS in the distributed bypass system. The internal structure of each
UPS is shown in Figure 6-5 through Figure 6-8 starting on page 6−7.
UPS Model
Input
9395−1100/1000
9395−1100/1100
9395−1100/650
9395−1100/750
9395−1100/825
9395−1100/1000
9395−1100/1100
9395−1100/650
9395−1100/750
9395−1100/825
9395−1100/1000
9395−1100/1100
9395−1100/650
9395−1100/750
9395−1100/825
®
9395 UPS (1000–1100 kVA) Installation and Operation Manual
Voltage
Output
480
480
480
480
480
480
S
164201764 Rev 1 www.powerware.com
UNDERSTANDING UPS OPERATION
System Type
Multiple UPS – Distributed Bypass
1+1 and 2+0 Configurations
Multiple UPS – Distributed Bypass
2+1 and 3+0 Configurations
Multiple UPS – Distributed Bypass
3+1 and 4+0 Configurations
6−17