Transfer From Normal To Bypass Mode And Shut Down Ups; Single Upm Shutdown - Eaton Powerware 9395 UPS 10001100 kVA Installation And Operation Manual

7.3.6

Transfer from Normal to Bypass Mode and Shut Down UPS

To transfer the critical load to Bypass mode and shut down the UPS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
NOTE Step 10 is not applicable to the three UPM model.
10. Repeat Steps 2 through 7 selecting
Power is present inside the UPS cabinet sections.
7.3.7

Single UPM Shutdown

To shutdown a single UPM:
1.
2.
3.
4.
5.
6.
EATON Powerware
®
9395 UPS (1000–1100 kVA) Installation and Operation Manual
Transfer the critical load to bypass by performing the procedure in
paragraph 7.3.4.
Press the pushbutton on the main menu bar. The System Status
CONTROLS
screen is displayed.
On the System Status screen, select the
On the UPS Control Command screen, select the
Press the pushbutton on the System Status menu bar. The UPM 1
CONTROLS
Control Command screen is displayed.
On the UPM 1 Control Command screen, select
Press the pushbutton on the UPM 1 Command menu bar.
SELECT
The UPM status indicates SHUTDOWN
open, and the power module is turned off. The bypass source supplies the critical
load.
Repeat Steps 2 through 7 selecting
Repeat Steps 2 through 7 selecting
Press the pushbutton on the main menu bar. The System Status
CONTROLS
screen is displayed.
On the System Status screen, select the the UPM Command. The UPS Control
Command screen is displayed.
On the UPS Control Command screen, select the the UPM to shutdown.
Press the pushbutton on the System Status menu bar. The UPM
CONTROLS
Control Command screen is displayed.
On the UPM Control Command screen, select
Press the pushbutton on the UPM Command menu bar.
SELECT
The UPM status indicates SHUTDOWN
open, and the power module is turned off. The remaining UPMs supply the
critical load.
UPS OPERATING INSTRUCTIONS
command.
UPM
command.
UPM 1
.
UPM OFF
.
The input, output, and battery contactors
to shut down UPM 2.
UPM 2
to shut down UPM 3.
UPM 3
to shut down UPM 4.
UPM 4
W A R N I N G
.
UPM OFF
.
The input, output, and battery contactors
S 164201764 Rev 1 www.powerware.com
7−15