Auto-Voip Untagged - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
auto-voip dscp
Parameter
value
0 to 64. By default, it is 0.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet )
Example
Set DSCP value of Auto VoIP on port 3 as 33:
T3700G-52TQ(config)# interface gigabitEthernet 1/0/3
T3700G-52TQ(config-if)# auto-voip dscp 33
52.5 auto-voip untagged
Description
The auto-voip untagged command is used to instruct voice devices to send
untagged packets.
Syntax
auto-voip untagged
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet )
Example
Instruct voice devices that are connected to port 3 to send untagged
packets:
T3700G-52TQ(config)# interface gigabitEthernet 1/0/3
T3700G-52TQ(config-if)# auto-voip untagged
value
——Set the DSCP value of Auto VoIP on specified ports. It ranges from
467
Advertisement
Table of Contents
