Arp Dynamic-Renew; Show Arp - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
49.6 arp dynamic-renew
Description
This arp dynamic-renew command is used to enable automatic update of
dynamic arp entries. To disable automatic update of dynamic arp entries,
please use the no arp dynamic-renew command.
Syntax
arp dynamic-renew
no arp dynamic-renew
Command Mode
Global Configuration Mode
Example
Enable automatic update of dynamic arp entries:
T3700G-52TQ(config)#arp dynamic-renew
49.7 show arp
Description
This show arp command is used to display the active ARP entries. If no
parameter is speicified, all the active ARPA entries will be displayed.
Syntax
show arp [
show ip arp [
Parameter
ip
—— Specify the IP address of your desired ARP entry.
mac
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the ARP entry with the IP as 192.168.0.2:
T3700G-52TQ(config)# show ip arp 192.168.0.2
ip
mac
] [
]
ip
mac
] [
]
—— Specify the MAC address of your desired ARP entry.
451
Advertisement
Table of Contents
