Dot1X Guest-Vlan - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet
ten-gigabitEthernet)
Example
Enable the IEEE 802.1X function for the Gigabit Ethernet port 1/0/1:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/1
T3700G-52TQ(config-if)#dot1x
17.7 dot1x guest-vlan
Description
The dot1x guest-vlan command is used to enable the Guest VLAN function
for a specified port. To disable the Guest VLAN function for a specified port,
please use no dot1x guest-vlan command. Please ensure that the Control
Type of the corresponding port is port-based before enabling the guest
VLAN function for it.
Syntax
dot1x guest-vlan {
no dot1x guest-vlan
Parameter
gvid
from 0 to 4093. 0 indicates that the Guest VLAN function is disabled. The
supplicants in the Guest VLAN can access the specified network sources.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet
ten-gigabitEthernet)
Example
Enable the Guest VLAN function for VLAN 5 on Gigabit Ethernet port 1/0/2:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/2
T3700G-52TQ(config-if)#dot1x guest-vlan 5
/
interface
gvid
}
—— The VLAN ID needed to enable the Guest VLAN function, ranging
/
interface
ten-gigabitEthernet
ten-gigabitEthernet
100
/
interface
range
/
interface
range
Advertisement
Table of Contents
