Logon By Ssh - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
4. Type enable command to enter Privileged EXEC Mode. A password that you have set
through Console port connection is required. Here the password has been set as 123.
Note:
You can refer to Chapter 12 User Manage Commands
detailed commands information of the Telnet connection configuration.

1.1.4 Logon by SSH

To log on by SSH, you can set up an SSH connection through Password Authentication Mode:
Password Authentication Mode: It requires username and password, which are both admin by
default.
Note:
Before SSH login, you should download or generate the SSH key file, then follow the steps
shown in Figure 1-8 to enable the SSH function through console connection. You can refer to
Chapter 19 SSH Commands
Figure 1-7 Enter into the Privileged EXEC Mode
for detailed commands information.
Figure 1-8 Enable SSH function
and Chapter 48 AAA Commands
9
for