Dot1X Timeout Guest-Vlan-Period; Dot1X Port-Control - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide

17.8 dot1x timeout guest-vlan-period

Description
The dot1x timeout guest-vlan-period command is used to specify the Guest
VLAN Period of the port. Once set the Guest VLAN on the port, after the
Guest VLAN Period, the port will be included in the Guest VLAN. To set the
value as default, please use no dot1x timeout guest-vlan-period command.
Syntax
dot1x timeout guest-vlan-period
no dot1x timeout guest-vlan-period
Parameter
period
90s.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet
ten-gigabitEthernet)
Example
Set the Guest VLAN Period as 100s on Gigabit Ethernet port 1/0/2:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/2
T3700G-52TQ(config-if)# dot1x timeout guest-vlan-period 100

17.9 dot1x port-control

Description
The dot1x port-control command is used to configure the Control Mode of
IEEE 802.1X for the specified port. By default, the control mode is "auto". To
restore to the default configuration, please use no dot1x port-control
command.
Syntax
dot1x port-control {auto | authorized-force | unauthorized-force}
no dot1x port-control
—— Specify the period, ranging from 1 to 300s. The default value is
/ interface
101
{period}
ten-gigabitEthernet / interface range