Ip Dhcp Server Exclude-Address; Ip Dhcp Server Pool - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide

38.6 ip dhcp server exclude-address

Description
The ip dhcp server exclude-address command is used to specify the
reserved IP addresses which are forbidden to allocate, such as the gateway
address, the network segment broadcast address, the server address etc. To
delete the reserved IP addresses, please use no ip dhcp server
exclude-address command.
Syntax
ip dhcp server exclude-address
no ip dhcp server exclude-address
Parameter
start-ip-address
end-ip-address
one IP address will be reserved if the end IP address and the start IP address
are the same.
Command Mode
Global Configuration Mode
Example
Set the reserved IP addresses from 192.168.1.1 to 192.168.1.9:
T3700G-52TQ(config)# ip dhcp server exclude-address 192.168.1.1
192.168.1.9

38.7 ip dhcp server pool

Description
The ip dhcp server pool command is used to create the address pool of
DHCP Server and enter the dhcp configuration mode. To delete the address
pool, please use no ip dhcp server pool command.
Syntax
ip dhcp server pool
no ip dhcp server pool
start-ip-address end-ip-address
start-ip-addr end-ip-address
—— Specify the start IP address of the reserved IP pool.
—— Specify the end IP address of the reserved IP pool. Only
pool-name
pool-name
331