Ip Igmp Startup-Query-Interval - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
ip igmp robustness
no ip igmp robustness
Parameter
robustness
default value is 2.
Command Mode
Interface Configuration Mode
Example
Configure the robustness of IGMP as 3 on Interface VLAN 2:
T3700G-52TQ(config)# interface vlan 2
T3700G-52TQ(config-if)# ip igmp robustness 3
41.10 ip igmp startup-query-interval
Description
The ip igmp startup-query-interval command is used to configure the
interval of Startup Query Messages that the switch sends on specified
interface. To restore to the default value on this interface, please use no ip
igmp startup-query-interval command.
Syntax
ip igmp startup-query-interval
no ip igmp startup-query-interval
Parameter
interval
sends, ranging from 1 to 300 seconds. The default value is 31 seconds.
Command Mode
Interface Configuration Mode
Example
Configure the interval of Startup Query Messages that the switch sends as 10
seconds on Interface VLAN 2:
robustness
—— Specify the robustness of IGMP, ranging from 1 to 255. The
—— Specify the interval of Startup Query Messages that the switch
357
interval
Advertisement
Table of Contents
