Shutdown - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Parameter
string
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet
ten-gigabitEthernet)
Example
Add a description Port #5 to Gigabit Ethernet port 1/0/5:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/5
T3700G-52TQ(config-if)#description Port#5
23.6 shutdown
Description
The shutdown command is used to disable an Ethernet port. To enable this
port again, please use no shutdown command.
Syntax
shutdown
no shutdown
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet
ten-gigabitEthernet)
Example
Disable Gigabit Ethernet port 20:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/20
T3700G-52TQ(config-if)#shutdown
—— Content of a port description, ranging from 1 to 16 characters.
/
interface
/
interface
ten-gigabitEthernet
ten-gigabitEthernet
165
/
interface
range
/
interface
range
Advertisement
Table of Contents
