Switchport General Allowed Vlan - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
T3700G-52TQ(config)#interface gigabitEthernet 1/0/2
T3700G-52TQ(config-if)#switchport mode trunk
T3700G-52TQ(config-if)#switchport trunk allowed vlan 2

4.7 switchport general allowed vlan

Description
The switchport general allowed vlan command is used to add the desired
General port to IEEE 802.1Q VLAN, or to remove a port from the
corresponding VLAN.
Syntax
switchport general allowed vlan
no switchport general allowed vlan
Parameter
vlan-list
multi-optional.
tagged | untagged —— egress-rule.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet/
interface ten-gigabitEthernet / interface range ten-gigabitEthernet)
Example
Configure Gigabit Ethernet port 1/0/4 whose link type is "general" to VLAN 2
and its egress-rule as "tagged":
T3700G-52TQ(config)#interface gigabitEthernet 1/0/4
T3700G-52TQ(config-if)#switchport mode general
T3700G-52TQ(config-if)#switchport general allowed vlan 2 tagged
—— VLAN ID list, ranging from 1 to 4093, in the format of 2-3, 5. It is
34
vlan-list
{ tagged | untagged }
vlan-list