Ip Ospf Authentication-Key; Ip Ospf Message-Digest-Key - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
46.30 ip ospf authentication-key
Description
The ip ospf authentication-key command is used to configure the key of the
simple authentication. To cancel this configuration, please use the no ip ospf
authentication-key command.
Syntax
ip ospf authentication-key
no ip ospf authentication-key
Parameter
password
or symbols. The password is case sensitive, allows spaces but ignores
leading spaces, and cannot contain question marks. By default, it is empty.
Command Mode
Interface Configuration Mode
Example
Configure the authentication mode of interface VLAN 2 as simple
authentication, and the password as 123:
T3700G-52TQ(config)#interface vlan 2
T3700G-52TQ(config-if)# ip ospf authentication-key 123
46.31 ip ospf message-digest-key
Description
The ip ospf message-digest-key is used to configure the ID and password of
the md5 authentication on the specified interface. To cancel the
configuration, please use no ip ospf message-digest-key command.
Syntax
ip ospf message-digest-key
no ip ospf message-digest-key
password
—— Super password, a string from 1 to 8 alphanumeric characters
id
421
password
md5
id
Advertisement
Table of Contents
