Ipv6 Address; Show Ipv6 Interface - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
50.7 ipv6 address
Description
This command is used to manually configure a global IPv6 address on the
interface. To remove a global IPv6 address from the interface, please use no
ipv6 address command.
Syntax
ipv6 address
no ipv6 address
Parameter
ipv6-addr
3ffe::1/64.
Configuration Mode
Interface Configuration Mode
Example
Configure the global address 3001::1/64 on VLAN interface 1:
T3700G-52TQ(config)# interface vlan 1
T3700G-52TQ(config-if)# ipv6 address 3001::1/64
50.8 show ipv6 interface
Description
This command is used to display the configured ipv6 information of the
management interface, including ipv6 function status, link-local address and
global address, ipv6 multicast groups etc.
Syntax
show ipv6 interface
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the ipv6 information of the management interface:
ipv6-addr
ipv6-addr
—— Global IPv6 address with network prefix, for example
457
Advertisement
Table of Contents
