Ip Dhcp Snooping Information Circuit-Id - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Global Configuration Mode
Example
Configure the customized sub-option Remote ID for the Option 82 as tplink:
T3700G-52TQ(config)#ip dhcp snooping information remote-id tplink
13.7 ip dhcp snooping information circuit-id
Description
The ip dhcp snooping information circuit-id command is used to enable and
configure the customized sub-option Circuit ID for the Option 82 on a
specified port/LAG. To return to the default Circuit ID for the Option 82,
please use no ip dhcp snooping information circuit-id command.
Syntax
ip dhcp snooping information circuit-id
no ip dhcp snooping information circuit-id
Parameter
string
most.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet
ten-gigabitEthernet)
Example
Enable and configure the customized sub-option Circuit ID for the Option 82
as "tplink" on port 1/0/1:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/1
T3700G-52TQ(config-if)#ip dhcp snooping information circuit-id tplink
—— Enter the sub-option Circuit ID, which contains 32 characters at
/
interface
string
ten-gigabitEthernet
81
/
interface
range
Advertisement
Table of Contents
