Ip Address; Ip Address-Alloc Dhcp - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide

22.9 ip address

Description
This ip address command is used to configure the IP address and IP subnet
mask for the specified interface manually. The interface type includes: routed
port, loopback interface and VLAN interface.
Syntax
ip address {
no ip address
Parameter
ip-addr
mask
Command Mode
Interface Configuration Mode
Example
Create the VLAN interface 2 with the IP address as 192.168.1.1 and subnet
mask as 255.255.255.0:
T3700G-52TQ(config)# interface vlan 2
T3700G-52TQ(config-if)# ip address 192.168.1.1 255.255.255.0

22.10 ip address-alloc dhcp

Description
The IP address-alloc dhcp command is used to enable the DHCP Client
function. When this function is enabled, the specified interface will obtain IP
from DHCP Server. To disable the IP obtaining function on the specified
interface, please use the no ip address command. This command applies to
the routed port and the VLAN interface.
Syntax
ip address-alloc dhcp
no ip address
ip-addr mask
} {
—— The IP address of the Layer 3 interface.
—— The subnet mask of the Layer 3 interface.
}
145