Show Dot1Q-Tunnel - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
switchport dot1q-tunnel mode nni
no switchport dot1q-tunnel mode
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet/
ten-gigabitEthernet)
Example
Configure the Gigabit Ethernet port 1/0/3 as the VPN up-link port:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/3
T3700G-52TQ(config-if)#switchport dot1q-tunnel mode nni

7.3 show dot1q-tunnel

Description
The show dot1q-tunnel command is used to display the global configuration
information of the VLAN VPN.
Syntax
show dot1q-tunnel
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration information of the VLAN VPN:
T3700G-52TQ(config)#show dot1q-tunnel
interface ten-gigabitEthernet
46
/ interface range