Chapter 8 Voice Vlan Commands; Voice Vlan; Voice Vlan (Interface) - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Chapter 8
Voice VLANs are configured specially for voice data stream. By configuring Voice VLANs and
adding the ports with voice devices attached to voice VLANs, you can perform QoS-related
configuration for voice data, ensuring the transmission priority of voice data stream and voice
quality.
8.1 voice vlan
Description
The voice vlan command is used to enable Voice VLAN function. To disable
Voice VLAN function, please use no voice vlan command.
Syntax
voice vlan
no voice vlan
Parameter
vlan-id
Command Mode
Global Configuration Mode
Example
Enable the Voice VLAN function for VLAN 10:
T3700G-52TQ(config)#voice vlan 10
8.2 voice vlan (interface)
Description
The voice vlan command is used to enable Voice VLAN mode for the desired
port. To disable Voice VLAN mode, please use no voice vlan command.
Syntax
voice vlan
no voice vlan
Voice VLAN Commands
vlan-id
—— Specify IEEE 802.1Q VLAN ID, ranging from 2 to 4093.
47
Advertisement
Table of Contents
