Switch Standby; Switch Priority - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Global Configuration Mode
Example
Specify the unit 1's role as master in the stack:
T3700G-52TQ(config)# switch 1 master
3.5 switch standby
Description
The switch standby command is used to set the role of a specified switch in
the stack as standby member. To cancel standby member setting, please use
no switch standby command.
Syntax
swtich
no switch standby
Parameter
unitid
Command Mode
Global Configuration Mode
Example
Specify the unit 1's role as standby member in the stack:
T3700G-52TQ(config)# switch 1 standby
3.6 switch priority
Description
The switch priority command is specify the stack member number and the
new priority for the stack member. To restore the priority of the specified
stack member to the default setting as unassigned, please use no switch
priority command.
unitid
standby
—— Specify the member number.
24
Advertisement
Table of Contents
