Show Tacacs-Server - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
time
response before it times out. The time ranges from 1 to 9 seconds. The
default is 5 seconds.
[ 0 ]
indicates that an unencrypted key will follow. 7 indicates that a symmetric
encrypted key with a fixed length will follow. By default, the encryption type is
string
0. "
exchange messages which contains 31 characters at most. The question
marks and spaces are not allowed. "
encrypted key with a fixed length, which you can copy from another switch's
configuration file. The key or encrypted-key you configured here will be
displayed in the encrypted form. Always configure the key as the last item of
this command.
Command Mode
Global Configuration Mode
User Guidelines
The TACACS+ servers you configured are added in the server group "tacacs"
by default.
Example
Configure a TACACS+ server with the IP address as 1.1.1.1, TCP port as 1500,
timeout as 6 seconds, and the unencrypted key string as 12345.
T3700G-52TQ(config)# tacacs-server host 1.1.1.1 port 1500 timeout 6 key
12345

48.2 show tacacs-server

Description
This show tacacs-server command is used to display the summary
information of the TACACS+ servers.
Syntax
show tacacs-server
Command Mode
Privileged EXEC Mode and Any Configuration Mode
—— Specify the time in seconds the switch waits for the server's
string encrypted-string
| 7
" is the shared key for the switch and the authentication servers to
—— 0 and 7 are the encryption type. 0
encrypted-string
434
" is a symmetric