Show Loopback-Detection Interface - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
global status, loopback detection interval and loopback detection recovery
time.
Syntax
show loopback-detection global
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of loopback detection function:
T3700G-52TQ# show loopback-detection global
28.8 show loopback-detection interface
Description
The show loopback-detection interface command is used to display the
configuration of loopback detection function and the status of the specified
Ethernet port.
Syntax
show loopback-detection interface [ fastEthernet
port
Parameter
port
port-channel-id
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of loopback detection function and the status of all
ports:
T3700G-52TQ# show loopback-detection interface
Display the configuration of loopback detection function and the status of
port 5:
T3700G-52TQ# show loopback-detection interface gigabitEthernet 1/0/5
| ten-gigabitEthernet
—— The Ethernet port number.
—— The ID of the port channel.
port
port-channel-id
| port-channel
221
port
| gigabitEthernet
]
Advertisement
Table of Contents
