Ip Pim Rp-Address; Ip Pim Bsr-Border - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
T3700G-52TQ(config)# ip pim rp-candidate interface vlan 2 225.0.0.1
255.0.0.0 interval 70

42.7 ip pim rp-address

Description
The ip pim rp-address command is used to configure the static RP. To
disable the static RP, please use no ip pim rp-address command.
Syntax
ip pim rp-address
no ip pim rp-address
Parameter
rp-addr
group-address
group-mask
override —— The RP configured with this command prevails if there is a
conflict between the RP configured with this command and one learned by
BSR.
Command Mode
Global Configuration Mode
Example
Configure the IP address of the static RP as 20.20.20.2 in group
224.1.1.1/255.0.0.0:
T3700G-52TQ(config)# ip pim rp-address 20.20.20.2 224.1.1.1 255.0.0.0

42.8 ip pim bsr-border

Description
The ip pim bsr-border command is used to configure the border of the BSR
packet on each interface that connects to other bordering PIM domains. To
disable the border of BSR on this interface, please use no ip pim bsr-border
command.
rp-addr group-address group-mask
ip-addr group-address group-mask
—— Specify the IP address of the static RP.
—— Specify the multicast group in which the RP functions.
—— Specify the mask of the multicast group.
370
[ override ]