Copy Startup-Config Usb; Copy Tftp Startup-Config - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
22.16 copy startup-config usb
Description
The copy startup-config usb command is used to upload the backup
configuration file to the USB stick.
Syntax
copy startup-config usb
Parameter
usb:filename
usb://filepath/filename.
Command Mode
Privileged EXEC Mode
Example
Save the startup configuration file of the switch to the USB stick and specify
the configuration file location as usb://building/l3:
T3700G-52TQ#
22.17 copy tftp startup-config
Description
The copy tftp startup-config command is used to download the
configuration file from the TFTP server to the switch as the startup
configuration file.
Syntax
copy tftp startup-config ip-address
Parameter
ip-addr
name
downloaded. The configuration file with the name
downloaded to the switch with corresponding unit ID in the stack.
usb:filename
—— Specify the configuration file location in the format of
copy startup-config usb
—— IP address of the TFTP server.
—— Specify the name of the configuration file which would be
usb://building/l3
ip-addr
filename
149
name
name_unitid
.cfg will be
Advertisement
Table of Contents
