Access-List Bind Acl(Vlan); Access-List Resequence - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
T3700G-52TQ(config)#interface gigabitEthernet 1/0/2
T3700G-52TQ(config-if)#access-list bind acl acl1
29.10 access-list bind acl(vlan)
Description
The access-list bind acl command is used to bind the ACL to a specified
VLAN. To cancel the bind relation, please use no access-list bind acl
command.
Syntax
access-list bind acl
no access-list bind acl
Parameter
acl
—— The name or ID of the ACL.
Command Mode
Interface VLAN Mode
Example
Bind acl1 to VLAN 2:
T3700G-52TQ(config)#interface vlan 2
T3700G-52TQ(config-if)#access-list bind acl acl1
29.11 access-list resequence
Description
The access-list resequence command is used to resequence rules of the
ACL.
Syntax
access-list resequence
Parameter
acl
—— The name or ID of the ACL.
sequence-start
the existing rules. It ranges from 1 to 2147483647.
sequence-step
resequencing the existing rules. It ranges from 1 to 2147483647.
acl
acl
acl sequence-start sequence-step
—— Specify the starting sequence number for resequencing
—— Specify the increment of sequence numbers for
230
Advertisement
Table of Contents
