Ip Vrrp Vrid Timer-Advertise - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
ip vrrp vrid
no ip vrrp vrid
Parameter
vrid
pri
—— Priority, ranging from 1 to 254. By default, the priority value is 100.
Command Mode
Interface Configuration Mode
Example
Configure the priority for the interface VLAN 3 as 123 in vrid 4:
T3700G-52TQ(config)#interface vlan 3
T3700G-52TQ(config-if)#ip vrrp vrid 4 priority 123
44.6 ip vrrp vrid timer-advertise
Description
This command sets the frequency, in seconds, that an interface on the
specified virtual router sends a virtual router advertisement. To restore the
advertisement interval to default value for an interface, please use no ip vrrp
vrid timer-advertise command.
Syntax
ip vrrp vrid
no ip vrrp vrid
Parameter
vrid
adver-interval
By default, it's 1 second.
Command Mode
Interface Configuration Mode
vrid
pri
priority
vrid
priority
—— The virtual router ID.
vrid
timer-advertise
vrid
timer-advertise
—— The virtual router ID.
—— Advertisement interval, ranging from 1 to 255 in seconds.
adver-interval
384
Advertisement
Table of Contents
