Show Policy-Map Interface Lag - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of policy applied to port 1/0/10 and inbound traffic:
T3700G-52TQ(config)#show policy-map interface 1/0/10 in

25.47 show policy-map interface lag

Description
The show policy-map interface lag command is used to display the
information of policy applied to the specific LAG.
Syntax
show policy-map interface lag
Parameter
lagid
in | out ——The traffic flow direction to which the policy is applied.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of policy applied to LAG 1 and inbound traffic:
T3700G-52TQ(config)#show policy-map interface lag 1 in
——The ID of the LAG.
lagid
{in | out}
211