System-Time Dst Recurring - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Configure the DST start time as 00:00 am on April 1
00:00 am on October 1
T3700G-52TQ(config)#system-time dst date Apr 1 00:00 2013 Oct 1 00:00
2013 30

22.5 system-time dst recurring

Description
The system-time dst recurring command is used to specify the DST
configuration in recurring mode. This configuration is recurring in use. The
time period is not restricted to be within one year.
Syntax
system-time dst recurring {
emonth
{
Parameter
sweek ——
sday ——
smonth——
Aug, Sep, Oct, Nov, Dec.
stime ——
eweek ——
eday ——
emonth ——
Aug, Sep, Oct, Nov, Dec.
etime ——
offset ——
comes. The range of value depends and the default value is 60 minutes. It is
optional.
Command Mode
Global Configuration Mode
of 2013 and the offset as 30 minutes:
st
etime offset
} { } [ ]
Week to start, with the options: first, second, third, fourth, last.
Day to start, with the options: Sun, Mon, Tue, Wed, Thu, Fri, Sat.
Month to start, with options: Jan, Feb, Mar, Apr, May, Jun, Jul,
Time to start, in the format of: hh:mm.
Week to end, with options: first, second, third, fourth, last.
Day to end, with options: Sun, Mon, Tue, Wed, Thu, Fri, Sat.
Month to end, with options: Jan, Feb, Mar, Apr, May, Jun, Jul,
Time to end, in the format of: hh:mm.
Specify the time adding in minutes when Daylight Saving Time
142
sweek sday smonth
} { } {
of 2013, the end time as
st
stime eweek eday
} { } { } { }