Show Switch - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
swtich
no switch
Parameter
unitid
type
Command Mode
Global Configuration Mode
Example
Create a provisioned switch whose stack member number is 2 and device
type is T3700G-52TQRev1:
T3700G-52TQ(config)# switch 2 provision T3700G-52TQRev1

3.10 show switch

Description
The show switch command is used to display the current stack's information.
Syntax
show switch [
counters | synchronization ]
Parameter
unitid
detail —— Display the detailed information of the stack, including stack
member, stack port and neighboring information.
neighbors —— Display the information of the stack neighbor.
stack-ports —— Display the information of the stack ports.
stack-ports counters —— Display the statistic information of the stack
ports.
synchronization ——Display the synchronization information.
unitid type
provision
unitid
provision
—— The stack member number of the provisioned switch.
—— The device type of the provisioned switch.
unitid
| detail | neighbors | stack-ports | stack-ports
—— Specify the member number.
27