Range; Ip Igmp Filter - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Configure the filtering mode of profile 1 as permit:
T3700G-52TQ(config)# ip igmp profile 1
T3700G-52TQ(config-igmp-profile)#permit
41.15 range
Description
The range command is used to configure the range of the profile's filtering
multicast address. To delete the corresponding filtering multicast address,
please use no range command.
Syntax
range
no range
Parameter
start-ip
end-ip
Command Mode
Profile Configuration Mode
Example
Configure one of the filter multicast address entry as range 225.1.1.1 to
226.3.2.1 in profile 1:
T3700G-52TQ(config)# ip igmp profile 1
T3700G-52TQ(config-igmp-profile)#range 225.1.1.1 226.3.2.1
41.16 ip igmp filter
Description
The ip igmp filter command is used to bind a profile to the specified VLAN
interface or routed port. To delete the profile-port binding entry, please use
no ip igmp filter command.
start-ip
end-ip
[
]
start-ip
end-ip
[
]
—— The start filtering multicast IP address.
—— The end filtering multicast IP address.
360
Advertisement
Table of Contents
