Lldp Transmit; Lldp Snmp-Trap - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Enable Gigabit Ethernet port 1/0/1 to receive LLDPDU:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/1
T3700G-52TQ(config-if)#lldp receive

36.4 lldp transmit

Description
The lldp transmit command is used to enable the designated port to transmit
LLDPDU. To disable the function, please use no lldp transmit command.
Syntax
lldp transmit
no lldp transmit
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet/
interface ten-gigabitEthernet / interface range ten-gigabitEthernet)
Example
Enable Gigabit Ethernet port 1/0/1 to transmit LLDPDU:
T3700G-52TQ(config)# interface gigabitEthernet 1/0/1
T3700G-52TQ(config-if)#lldp transmit

36.5 lldp snmp-trap

Description
The lldp snmp-trap command is used to enable the port's SNMP notification.
If enabled, the port will notify the trap event to network management system.
To disable the ports' SNMP notification, please use no lldp snmp-trap
command.
Syntax
lldp snmp-trap
no lldp snmp-trap
313