Revision; Spanning-Tree Mst Instance - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide

30.8 revision

Description
The revision command is used to configure the revision level of MST
instance.
Syntax
revision
Parameters
revision
to 65535.
Command Mode
MST Configuration Mode
Example
Configure the revision level of MST as 100:
T3700G-52TQ(config)#spanning-tree mst configuration
T3700G-52TQ(config-mst)#revision 100

30.9 spanning-tree mst instance

Description
The spanning-tree mst instance command is used to configure the priority
of MST instance. To return to the default value of MST instance priority,
please use no spanning-tree mst instance command.
Syntax
spanning-tree mst instance
no spanning-tree mst instance
Parameter
instance-id
priority
61440. By default, it is 32768. MSTI priority is an important criterion on
determining if the switch will be chosen as the root bridge in the specific
instance.
Command Mode
Global Configuration Mode
revision
—— The revision level for MST region identification, ranging from 0
—— Instance ID, ranging from 1 to 8.
—— MSTI Priority, which must be multiple of 4096 ranging from 0 to
238
instance-id priority
priority
instance-id
priority