Switch Renumber - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
swtich
no switch
Parameter
unitid
priority
Command Mode
Global Configuration Mode
Example
Specify the unit 1's priority as 10 in the stack:
T3700G-52TQ(config)# switch 1 priority 10

3.7 switch renumber

Description
The switch renumber command is modify the member number of a specified
stack member.
Syntax
swtich
Parameter
unitid
newid
auto-numbering —— The specified member will obtain its stack number
through auto-numbering.
Command Mode
Global Configuration Mode
Example
Modify the unit 1's new member number as 2:
T3700G-52TQ(config)# switch 1 renumber 2
unitid priority
priority
unitid
priority
—— Specify the member number.
—— Specify the member's priority, ranging from 0 to 15.
unitid newid
renumber {
—— Specify the member to be renumbered.
—— Specify the new stack member number for the stack member.
| auto-numbering }
25