Service-Policy; Service-Policy (Interface) - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
generation rate as 2000 Kbps and the maximum capacity as 128 Kbytes. Set
the conform action as transmit, the exceed action as mark the packets with
the specified IP Precedence value(4), the violate action as drop:
T3700G-52TQ(config)#policy-map tp
T3700G-52TQ(config-pmap)#class market
T3700G-52TQ(config-pmap-c)#two-rate 1000 64 2000 128 conform
transmit exceed set-prec-transmit 4 violate drop

25.39 service-policy

Description
The service-policy command is used to apply a specific policy to inbound or
outbound traffic globally. To delete the configuration, please use no
service-policy command.
Syntax
service-policy { in | out }
no service-policy { in | out }
Parameter
service-policy-name
31 alphanumetric characters.
Command Mode
Global Configuration Mode
Example
Apply a policy named tp to inbound traffic globally:
T3700G-52TQ(config)#service-policy tp in

25.40 service-policy (interface)

Description
The service-policy command is used to apply a specific policy to inbound or
outbound traffic on the interface. To delete the configuration, please use no
service-policy command.
Syntax
service-policy { in | out }
policy-map-name
policy-map-name
—— Specify the name of the policy, ranging from 1 to
policy-map-name
207