Management-Port Ipv6 Address - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
management-port ipv6 enable
no management-port ipv6 enable
Command Mode
Global Configuration Mode
Example
Enable the IPv6 function on the management port：
T3700G-52TQ(config)# management-port ipv6 enable
51.5 management-port ipv6 address
Description
This management-port ipv6 address command is used to manually
configure a global ipv6 address on the management port. To remove a global
ipv6 address from the management port, please use no management-port
ipv6 address command.
Syntax
management-port ipv6 address
no management-port ipv6 address
Parameter
ipv6-addr
3ffe::1/64.
Configuration Mode
Global Configuration Mode
Example
Configure the global IPv6 address 3001::1/64 on the management port:
T3700G-52TQ(config)# management-port ipv6 address 3001::1/64
—— Global ipv6 address with network prefix, for example
461
ipv6-addr
ipv6-addr
Advertisement
Table of Contents
