Uneven Density - Xerox Phaser 3320 Service Manual

Image Quality

Uneven Density

Print Density is uneven between left and right.
Initial Actions
• Check that the Transfer Roller is properly installed.
• Check that the media is dry and in good condition.
• Clean the laser window.
Troubleshooting Reference Table
Applicable Parts
• Print Cartridge, PL1.0.12
• Transfer Roller, PL3.1.106
• HVPS, PL3.1.44
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the high voltage contacts on the Print
Cartridge for damage.
The contacts are undamaged.
2. Replace the Transfer Roller (page 4-38).
Does the error persist?
3-12 Phaser 3320 and WorkCentre 3315/3325
Service Manual
Example Print
Density Uneven or Wrong (Scan Direction)
Yes
Go to step 2.
Replace the HVPS
(page 4-62).
No
Replace the Print
Cartridge (page 4-4)
Complete.
Xerox Internal Use Only