Xerox Phaser 3320 Service Manual page 81

Error Troubleshooting
DADF Jam
Paper jam occurred in the DADF.
Applicable Errors
• 05-100: Original Paper Jam
• 05-600: Original Paper Jam
Initial Actions
• Open the ADF/DADF Cover and remove the jammed paper.
• Turn the machine on and then off, if the error persists use the following procedure.
Troubleshooting Reference Table
Applicable Parts
• DADF Pick Up Unit, PL8.12.2
• ADF Pick Up Assembly, PL7.1.2
• ADF Paper Path Assembly, PL7.1.3
• DADF Feed Roller, PL8.2.14
• DADF Rubber Unit, PL8.3.2
• DADF Lifting Solenoid. PL8.4.8
• DADF Feed Sensor, PL8.3.24
• DADF Registration Sensor, PL8.2.13
• DADF Drive, PL8.1.5
• ADF Drive, PL7.1.4
• DADF Assembly, PL8.1.0
• ADF Assembly, PL7.1.0
Troubleshooting Procedure Table
Step Actions and Questions
1. Is the ADF/DADF Cover completely closed?
Does the error persist?
2. Does the error persist?
3. Reseat P/J3 on the Main Board.
Does the error persist?
4. Does the ADF/DADF feed the document?
5. Check the media path.
Is there debris in the media path?
6. Does the error persist?
2-28 Phaser 3320 and WorkCentre 3315/3325
Service Manual
Wiring and Plug/Jack Map Reference
• WorkCentre 3315 System Wiring
• WorkCentre 3315 Scanner
• WorkCentre 3325 System Wiring
• WorkCentre 3325 Scanner and DADF
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 5.
Remove the debris and
go to Step 6.
Go to step 7.
on page 7-25
on page 7-30
on page 7-31
on page 7-36
No
Close the ADF/DADF
Cover and go to step 2.
Complete.
Complete.
Go to step 7.
Go to step 7.
Complete.
Xerox Internal Use Only