Maintenance
Adjusting Altitude
Print quality varies with barometric pressure. Since the barometric pressure decreases as the altitude
increases, altitude can affect the print quality. To optimize print quality for your location, select an
altitude setting to match the your location.
4,000 m
(13,123 ft)
3,000 m
(9,842 ft)
2,000 m
(6,651 ft)
1,000 m
(3,280ft)
To adjust altitude:
1.
Press the Machine Status button.
2.
Use the arrow buttons to select System Setup, and then press OK.
Note:
If asked for a password, use the keypad to enter the first password character and then press
the Right Arrow button. Repeat this button sequence to enter the password, and then press OK.
3.
Select Machine Setup > Altitude Adjustment.
4.
Select the value closest to the altitude of your location and press OK.
Firmware Upgrade Procedure
Upgrade printer firmware using one of two methods:
•
Remote using CWIS
•
Local using a USB Flash drive
Remote Upgrade
Use CentreWare Internet Service (CWIS) or CentreWare Web to upgrade a networked printer.
Note:
CentreWare Web can only be used by the System Administrator.
1.
Open Microsoft Internet Explorer.
2.
Enter the printer's IP address into the address box and press return.
3.
After the CentreWare Services window opens, click on the Properties Tab.
4.
Enter the customer's username and password.
6-6
Phaser 3320 and WorkCentre 3315/3325
Service Manual
Value
High 3
1
High 2
2
3
High 1
Normal
4
s3320-119
Xerox Internal Use Only