Introduction And Overview; Technical Support Information - Xerox Phaser 3320 Service Manual

General Information

Introduction and Overview

The Phaser 3320 and WorkCentre 3315/3325 use a single-pass laser design, offering mono print
speeds of 33 to 37 ppm, and resolutions up to 1200 x 1200 dots-per-inch (dpi).
The Tray 1 is a 250-sheet multi purpose tray. The Bypass Tray is a 50 sheet tray that supports specialty
media, card stock, and envelopes. The Output Tray holds 150 sheets facedown.
The WorkCentre 3315/3325 combines a 1200 dpi scanner with the laser printer to provide copy, scan,
and print functions. Both models have a G3 Fax modem, Ethernet interface, and wireless capability to
provide networked copy, scan, and Fax functions.The WorkCentre 3315 model has an Automatic
Document Feeder (ADF), and the WorkCentre 3325 has a Duplex Automatic Document Feeder (DADF).

Technical Support Information

The Xerox Service Manual is the primary document used for repairing, maintaining, and
troubleshooting the printer. To ensure complete understanding of this product, participation in Xerox
Service Training is strongly recommended. To service this product, certification for this product is
required.
For updates to the Service Manual, Service Bulletins, knowledge base, etc., go to:
https://www.xrxgsn.com/secure/main.p
• Xerox Global Service Net -
For further technical support, contact your assigned Xerox Technical Support for this product.
Xerox Internal Use Only Phaser 3320 and WorkCentre 3315/3325 1-11
Service Manual