Service Parts Disassembly
11. Disconnect P/J100. Remove 3 screws (silver, flanged, tap, 10 mm) and release the DADF Drive.
DADF White Bar Plate
PL8.2.2
Note:
The White Bar Plate has two springs beneath it. When removing the White Bar Plate, be
careful to not lose these springs.
1.
Lift up the DADF and disconnect the White Bar Plate bosses and remove the White Bar Plate.
4-108
Phaser 3320 and WorkCentre 3315/3325
Service Manual
s3320-115
s3200-190
Xerox Internal Use Only