Paper Mis-Feed From Tray 3 (Optional Feeder) - Xerox 3450B - Phaser B/W Laser Printer Service Manual

Paper Mis-feed from Tray 3 (Optional Feeder)

Troubleshooting References
Applicable Parts
Main Board
Tray 3 Assembly
Procedure
Step Action and Questions
Is paper loaded correctly?
1 a.
Is the tray damaged?
2 a.
Are parts missing?
b.
Is Tray 2 chute obstructed?
3 a.
Is the interface connector between the
4 a.
printer and Tray 3 damaged?
Does Tray 3 Pick Roller rotate when the
5 a.
Solenoid actuates? Refer to "Service
Diagnostics Menu Map" on page 3-9.
Are the feed roller or retard/drag pads dirty ? Clean if dirty.
6
a.
4-8
Wiring and Plug/Jack Map References
Yes
Go to Step 2.
Replace Tray 3
Assembly.
Clear
obstruction.
Replace
interface
harness.
Go to Step 5.
Phaser 3450 Laser Printer Service Manual
No
Load paper
correctly.
Go to Step 3.
Go to Step 4.
Go to Step 5.
Replace Tray 3
Assembly.
Replace Tray 3
Assembly
Replace Main
Board.