Spots From Adf - Xerox Phaser 3320 Service Manual

Image Quality

Spots from ADF

There are spots on copies from the ADF.
Initial Actions
• Check the document glass.
• Ensure there are no debris on the document glass.
Troubleshooting Reference Table
Applicable Parts
ADF Scanner Assembly, PL9.1.1
DADF Scanner Assembly, PL10.1.3
Troubleshooting Procedure
Step Actions and Questions
1. Check the original document.
Are there spots on the original document?
2. Check for debris on the document glass.
Is there any debris?
3. Does the image quality improve?
3-22 Phaser 3320 and WorkCentre 3315/3325
Service Manual
Example Print
Yes
Replace the original
document.
Remove the debris and
clean the document
glass using a lint-free
cloth.
Complete.
Random Spots
No
Go to step 2.
Go to step 3.
Replace the Scanner
(page 4-86).
Xerox Internal Use Only