Toner Smears
There are faded or completely non-printed lines along the page in the direction of the paper travel
from the leading edge to the trailing edge.
Initial Actions
•
Check that the media settings match the media in use.
•
Check that the media is dry and in good condition.
Troubleshooting Reference Table
Applicable Parts
• Fuser, PL3.3.0
• Transfer Roller, PL3.1.106
Troubleshooting Procedure Table
Step
Actions and Questions
1.
Reseat P/J15 on the Main Board, and P/J3 on
the LVPS.
Does the image print correctly?
2.
Replace the Fuser (page 4-26).
Does the image print correctly?
3.
Replace the Print Cartridge (page 4-4).
Xerox Internal Use Only
Example Print
Yes
Complete.
Complete.
Phaser 3320 and WorkCentre 3315/3325
Image Quality
Smudges or Smears
No
Go to step 2.
Replace the Transfer
Roller.
Service Manual
3-19