Feeder; Tray 1; Pick Up / Retard Roller; Registration Roller - Xerox Phaser 3320 Service Manual
Hide thumbs
Also See for Phaser 3320:
- Specifications (4 pages) ,
- Installation manual (2 pages) ,
- Service manual (67 pages)
Table of Contents
Advertisement
General Information
Feeder
Tray 1
The basic tray is located on front side of the machine and allows feeding of common paper. Paper size
is set using the Size Guides in each tray. Adjust the Paper length/width guides to match the paper size.
Paper Length Guide
Paper Width Guide
s3320-045
Pick Up / Retard Roller
When pickup takes place, the Pick Up Roller rotates to separate and transport the paper. The Pick Up
Roller rotates when the Pick Up Clutch is activated. The Retard Roller ensures that a single sheet of
paper is moved to the paper path, and the paper is moved as far as the Registration Roller by the Feed
Roller.
Pick Up Roller
Retard Roller
Lift Pad
s3320-235
Registration Roller
When a sheet is fed from the tray to the toner transfer section, the registration of the sheet may not be
correctly maintained due to misalignment of lead edges in the tray. To avoid this problem, the lead
edge position needs to be aligned at the Registration Rollers before the sheet is fed in front of the
Transfer Belt, or in front of the BTRs.
By pressing the edge of the sheet fed out of the Tray 1 or Bypass Tray against the Registration Roller
that is locked, the lead edge position of the sheet is corrected.
Xerox Internal Use Only
Phaser 3320 and WorkCentre 3315/3325
1-21
Service Manual
Advertisement
Table of Contents
Troubleshooting
