Table of Contents
Advertisement
CDM-750 Advanced High-Speed Trunking Modem
Ethernet Management
6.5.4.2.2
Admin | SNMP
The 'Admin | SNMP' page (Figure 6-5) sets and returns administration information for the
CDM-750 Simple Network Management Protocol (SNMP) feature.
The Administrator can assign up to two SNMP Trap IP addresses.
The Administrator can assign a SNMP Trap Community String. The factory default for this
parameter is public. The SNMP Trap Community String field can be any combination of
characters and a length of 0–20 characters.
Once the desired configuration settings have been made on this page, click [Submit Admin] to
save these changes.
For details pertaining to the configuration parameters available on this page, refer to Chapter 5.
FRONT PANEL OPERATION and Sect. 6.3 SNMP INTERFACE.
Figure 6-5. Admin | SNMP page
6–12
Revision 1
MN-CDM750
Advertisement
Table of Contents
